SELECT THE WIDTH, DEPTH AND STYLE OF YOUR SHELVES; AVAILABLE IN MDF OR WIRE

RACK IT 400KG MDF SHELF 1197x497mm
 
 
 
 
 
 
 
Play VideoPlay Video

MDF Shelf 1197x497mm

Step 3 – Configure your Shelves

This 1197x497mm MDF Shelf is specifically designed for use with Rack It 600KG systems with 530 rack depth and 1249mm (requires 2 per shelf) Beams.

To install, place the MDF Shelf onto your already installed Beams and Braces to complete your robust 600kg weight loading Shelves. You can mix and match with Wire Shelves.

MDF Shelves offer a robust shelving solution for your Rack It system and can also be used to create a work bench top. MDF Shelves are available in multiple widths, for both 430 and 530mm depth systems.

Note: MDF is designed for general purpose interior use only. It is not suitable for outdoor use or areas where wetting or high humidity and moisture conditions are likely. To further protect against surface mould that may disfigure the surface appearance, it is recommended to apply brush-on preservatives or a coat of paint.

  • This MDF Shelf is 1197mm wide and 497mm deep, for use with 1249mm Beams
  • Designed for use with the Rack It 600KG system with 530mm rack depth
  • Perfect robust shelving solution or workbench top
  • Designed for use with the Rack It 600KG system with 530mm rack depth

Available at Bunnings: I/N 2760532

DIMENSIONS

1197W x 9H x 497D mm

Designed for 500mm deep shelves Tolerance(+/- 2mm)

SAFETY

To ensure weight load capacity and shelf integrity this product must be used with the appropriate Shelf Support Braces.
MDF is designed for general purpose interior use only.
It is not suitable for outdoor use or areas where wetting or high humidity and moisture conditions are likely.
To further protect against surface mould that may disfigure the surface appearance, it is recommended to apply brush-on preservatives or a coat of paint.

FREQUENTLY ASKED QUESTIONS

For a small garage workshop, the Rack It 600KG does the job. Each shelf holds up to 600kg evenly distributed, for a total weight bearing of 2,400kg per bay. The narrower 430mm or 530mm depth footprint fits tight walls and keeps your floor space free. Slot and lock with a pin, only a rubber mallet is needed for assembly. Build out with extra bays, shelves or accessories from the same range (available at Bunnings) as the workshop grows.

For a garage storage setup with Rack It 600KG, start with a base bay and add more shelves and accessories over time. Each shelf holds up to 600kg evenly distributed across a 430mm or 530mm depth. Choose between MDF or Wire shelves. Add Drawer Kits, Hook Plates and Hooks as your storage needs grow. Expand over time and grab additional components from Bunnings.

The Rack It 600KG range is available at Bunnings in store and online [bunnings.com.au]. Prices and stock change regularly, so check the Bunnings website or your local store for availability, click and collect and delivery options. Online is the quickest way to see what’s in stock at your nearest store, but an in-store visit may help you connect with an in-store Rack It Specialist.

Each shelf in the Rack It 600KG range holds up to 600kg evenly distributed when the load is spread across the full shelf surface. Maximum 4 shelves per bay. Spread heavy items centrally and avoid stacking weight on one edge. Follow the anchoring instructions in the box every time.

  • Previous Project1000KG & 600KG Safety Pin - 20 pack - Rack It

  • Next ProjectTemplate Red

Share